Back panel of the truck is taped off and ready for fiberglass 12/4/08

15 yards of fiberglass and 5 gallon of resin 12/5/08

David begining to lay fiberlgass 12/5/08

Applying fiberglass to the back wall 12/5/08

Applying fiberglass to the back wall 12/5/08

Applying fiberglass to the back wall 12/5/08

Dry moulding with first layer of fiberlgass from rear wall 12/5/08

Three layers of fiberlgass are on the mould 12/5/08

Applying fourth layer of fiberglass 12/6/08

Waiting for fifth and final layer of fiberglass to dry 12/6/08

The rings are cut to hold the subwoofers in place 12/9/08

The bottom form of the subwoofer enclosure is taking shape 12/9/08

Test fitting the subwoofer enclosure with speaker rings 12/11/08

Fiberglassing the sides of the enclosure 12/11/08

Applying fiberglass 12/11/08

Laying on fleece layer over the front side of enclosure 12/11/08

Fleece on the front side of enclosure 12/11/08

Detail work around each subwoofer ring 12/11/08

Ready for more fiberglass 12/11/08

Hardner applied to the front fleece of the subwoofer enclosure 12/12/08

Subwoofer enclosure drying 12/12/08

Final layer is mostly sanded and will soon be ready for covering 12/15/08

Covering the subwoofer enclosure with JL embossed in center 12/18/08

Ready to load the subwoofers into the enclosure 12/18/08

Testing the enclosure on the showroom floor 12/18/08

Enclosure installed in truck 12/18/08

Tight fit behind the seats 12/18/08

The crossovers are connected and will be spaced out and mounted under the subs 12/20/08

All six subwoofers with the crossovers below 12/31/08